SC & SCP series bearings for continuous casting machines (Cylindrical roller bearings with Aligning ring - Special bearings for CCM) •In continuous casting machines, roll support bearings are used under heavy loads and at extremely low speed. In addition, the operating conditions are severe, resulting in exposure to splashing water
2021/06/15 liyulong126
Water cooling bearing and housing units , HSC bearing units with half-round outer ring for continuous casting machines
2021/06/15 Kevin Li
1. Purpose and effectThe purpose of lubrication is to reduce friction and wear inside the bearing and thus to prevent seizure. Effects of the lubrication are described below:1.1 Reduction in the wear
2021/06/15 liyulong126
There are several types of bearing that can be used for CCM (continuous casting mill), like Spherical roller bearing, Carb bearing and cylindrical roller bearing.In addition, there is a special kind o
2021/06/15 FV bearing
SKF Sendzimir mill bearing, Back-up bearings BEARING CODE DIMENSIONS (mm)Mass DesignModeldDBCHd1D1EFrKN 1)(Kg)BNTB 326006/HB1501105655306676.580.660.61432.91.1BNTB 326006/HB1BNTB 322358501205251.232.5709885.363.31433.42BNTB 322358BNTB 326250/HB150
2021/06/09 liyulong126
The performance of the four-row tapered roller bearing is basically the same as that of the double-row tapered roller bearing, but the radial load is greater than that of the double-row tapered roller bearing, and the limit speed is slightly lower.
2021/06/09 FV BEARING
Back-up rollers Multi-roll cold mill stands are described using different terms depending on their type and manufacturer: ■ 12 and 20 roll stand ■ Z-High.■ S-High. Multi-roll cold rolling mills are u
2021/06/09 liyulong126
Backing Bearings for Multi-Roll Rolling Cluster Mills - (Replace NSK) A list of available bearings can be found in the following dimensions table. For any dimensions which are not on the table, please consult FV.
2021/06/08 liyulong126
