Wind Power Bearing Classification and Production Process

2020-12-11 10:43:08 FV Bearing

In recent years, wind power generation, as a renewable and green new clean energy, are highly valued by every country and be made considerable progress.


rolling mill bearings, Roll neck bearings, Tapered roller bearings, Spherical roller bearings


The wind power bearings mainly include: yaw bearing assembly, pitch bearing, blade spindle bearing, transmission bearing  etc.

According to the structure the wind power bearing can be divided into: four-point contact ball bearing, cross roller bearing, cylindrical roller bearing, self-aligning roller bearing, deep groove ball bearing, etc.

rolling mill bearings, Roll neck bearings, Tapered roller bearings, Spherical roller bearings

FV wind power bearing can improve the design and application level of domestic bearing industry, thus narrowing the gap with foreign advanced level in the world, promote the development of domestic bearing industry and technological progress. In addition, the wind power bearing of FV can reduce the cost of wind power and expedite the development of new energy and renewable energy.

Wind power bearing is a kind of special bearing. It is usually be used in a bad environment, has high maintenance cost and requires a high life. So this requires the more strict production process.

rolling mill bearings, Roll neck bearings, Tapered roller bearings, Spherical roller bearings

FV wind power bearing production process as follows;

1. Control the forging temperature, no coarse grain, which will affect the wind power bearing lifetime.

2. Control the quenching and hardening process to ensure the tempering structure of the bearing heart and good mechanical properties;

3. Control the depth of intermediate frequency quenching and hardening layer on the surface;

4. Avoid the fine cracks on the surface.


Welcome you to consult wind power bearing information and installation technology or application and other information.